[. . . ] · Do not carry the camera in a metal container during positioning. If the camera is covered with metal, the positioning function cannot work. · In the following situations, the camera cannot receive GPS information. [. . . ] Recording a Log at a Set Interval and Duration 1 2 Press the Q button after shooting still pictures or movies. Press the 4 button until the GPS information is displayed. If the camera did not receive GPS information, the values are displayed as "--". *The positioning time is displayed in GPS time (time data received from GPS satellites). This may be different from the time you have set on the camera. 100 - 0038 (White) 1 2 3 4 5 Use the four-way controller (23) to select [GPS] on the [WSetting] menu. Press the four-way controller (5). The [GPS] screen appears. GPS information has been received. [GPS On/Off] on the [GPS] setting is set to [On], and signals from GPS satellites have been received. [GPS On/Off] on the [GPS] setting is set to [On], but signals from GPS satellites have not been (Red) received. To recover from an error, turn off the camera, remove and then re-insert the battery and turn on the camera again. When [GPS On/Off] is set to [Off], no icon is displayed. 1 2/'12 GPS 02 / 02/'12 06: 25: 00 Edit Use the four-way controller (23) to select [GPS] on the [WSetting] menu. Press the four-way controller (5). The [GPS] screen appears. N 35 45' 52" W139 41' 29" 2 3 Positioning time Positioning latitude and longitude Use the four-way controller (23) to select [GPS Logging]. If you cannot select this menu, set [GPS On/Off] to [On]. GPS GPS On/Off GPS Logging GPS Time Sync MENU On Use the four-way controller (23) to select [GPS On/ Off]. Press the four-way controller (5). A pull-down menu appears. · Only when is displayed on the capture mode screen, the GPS information is recorded onto images. · When [GPS On/Off] is set to [On], the camera performs positioning regularly even if it is turned off, which reduces the battery life. · When recording GPS information onto a movie, the data at the start of recording is saved. · When dividing a movie, the GPS information before dividing is displayed. [. . . ] The log files are saved in the [GPSLOG] folder under the root directory of the SD Memory Card. Use the four-way controller (23) to select [GPS Logging]. GPS GPS On/Off GPS Logging GPS Time Sync MENU On Off 1hr. OK 1 OK Cancel Use the four-way controller (23) to select [GPS] on the [WSetting] menu. Press the four-way controller (5). The [GPS] screen appears. 10 Use the four-way controller (23) to select [Start], and press the 4 button. Record log Starts log recording Start Logging Interval 15sec. Logging Duration 1hr. MENU OK 2 3 OK 4 5 6 Press the four-way controller (5). The [GPS Logging] screen appears. Use the four-way controller (23) to select [GPS Logging]. GPS GPS On/Off GPS Logging GPS Time Sync MENU Use the four-way controller (23) to select [Discard log data], and press the 4 button. A confirmation screen appears. On · Once you record a log, you cannot record a new log until you save the existing log to the SD Memory Card as a log file (p. 10) or discard it (p. 12). [. . . ]